Command Menu Setup
9
8
#
SOS
In power saving mode, press“ ”to activate keypad. Enter
“
”, blue LED light up to enter setup state.
admin password#9
Please enter the commands as below to setup. Keypad will
be programmed successfully after one beep is heard.
Settings
Enter Setup State
*
#
9
admin password
Note! No operation within 30seconds, keypad will automatically
exit setup state. User can press “ ” “ ”, “ ” or “SOS”
during programming, keypad beeps twice to exit setup state.
Quick Arm On
Quick Arm Off
Touch Tone On
Touch Tone Off
RFID Function On
RFID Function Off
Power saving mode. After touch
tone is off, Green LED flashes
once when button is pressed.
。
*
1 #
*
1
*
*
2 #
*
2
*
*
3 #
*
3
*
*
4 #
Function
Mark
Press Button
*
4
*
*
5 #
Factory
Default
Once RFID function is
enabled, user cannot
disarm the system by the
RFID cards.
Emergency Call
with Password
Emergency Call
without Password
Please enter the password
before triggering SOS button.
Press SOS button for 3
seconds without password
Normal Working
Mode On
If keypad is powered by
DC 12V power, normal
working mode is
recommended.The green
LED keeps on. And digital
keypad can be operated
without pressing activate
key. In normal mode, user
can disarm the systemwith
RFID cards close to the
reader directly
Default
Default
Default
Default
When quick arm function
is enabled, users can press
+ to arm the system
without password.
*
*
Admin password is 123456 as default