Digital Keypad Operation
Arm
Stay Arm (Home Mode)
Press , keypad beeps once and control panel beeps twice
into disarming state, the electronic door lock will be opened
as well (If connected).
Disarm
In power saving mode, please press “ ” to activate keypad.
Then please enter
admin password # or user password #
before operating the digital keypad.
*
Press
button, then press
or
within 3 seconds
“ ”
“ ”
“ ”
to enter arming or disarming state in mute mode without
disturbing someone.
SOS Emergency Call
Once there's an emergency situation,press
for 3
SOS
seconds to activate an immediate alarm.
Note! To avoid any false operation, please enable functions of “
Emergency Call with Password” refer to Page9.
Mute Mode
Disarm by RFID Tag/Card
7
6
Press , keypad and control panel beeps once to enter
arming state. Any detectors triggered will activate the
system to alarm immediately. The system simultaneously
calls the preset phone numbers.
Press , control panel beeps once to enter arming state
after 3 seconds. The accessories in home mode are disarmed,
this allows the user to move freely at home, while the rest of
the system is fully armed, the accessories in normal zones will
activate an immediate alarm when triggered.
In power saving mode, press
“ ”
to activate keypad. Put RFID tag close
to the RFID reader to disarm the system. And the electronic door
lock will be opened as the same time.
User can directly put RFID tag close to the RFID reader to disarm
the system if system is not in power saving mode.
Note! Press
“ ”
to activate keypad, no operations within 5 seconds,
keypad will exit setup state automatically.
*
+ /
*
Admin password is 123456 as default
User password is 1234 as default