RESIDENTIAL GATEWAY MODEL TG799VN | 11
5.2 CONNECTING THE DECT PHONE
Introduction
The Residential Gateway is equipped with a DECT base station allowing you to connect up to five DECT
phones. Before you can start using your DECT phone, you first have to pair it with your Residential Gateway.
Procedure
Proceed as follows:
1. Put the Residential Gateway in pairing mode. You can do either of the following:
Press the DECT button on the Residential Gateway until the DECT LED on the front panel starts flashing.
Via the Residential Gateway GUI.
1. On the
Toolbox
menu, click
Telephony
.
2. Under
Pick a task
, click
DECT pairing
.
2. Put your DECT phone in pairing mode.
5.3 REGISTER TH58 TO TG799vn
Proceed as follows:
1. The DECT phone prompts you to register your handset. If you do not see this message, open the Menu
and select
Settings > Registration > Register Handset.
2. Press
3. The DECT phone prompts you to start registration on your base station.
4. Start DECT registration (also referred to as DECT pairing) on your base station. For more information,
consult the documentation of your base station.
5. Press
6. If your DECT phone prompts you to enter the system PIN, enter the system PIN of your base station. In
most cases, the system PIN will be “0000”.
7. Your DECT phone is now looking for your base station.
8. When successful, your DECT phone prompts you that your DECT phone is now registered.
