13
ENGLISH
4.3.1 Antenna Setup for DiSEqC 1.2
1. Select
Motor Antenna
in
Antenna Connection
.
2. Enter
Antenna Setup
, navigate with the arrow key DOWN to the
Motor Type
option and select DiSEqC1.2 by
LEFT/RIGHT
button.
3. Navigate with the arrow key DOWN to
Motor Setting
option and press
OK
button.
Motor Setting
Satellite/ Transponder
Select a Satellite and a Transponder.
Position No. & Save
Press
LEFT/RIGHT
button and select one of the 64 settings (0 to 63). You also can
press numeric keys directly to input Position No.
Go to x
Press OK button and select one of the 64 settings (0 to 63). Press OK button and it
shows a message on the screen "Wait to move the position!”
Save
Press
LEFT/RIGHT
button to move dish, press
OK
button to save the position.
Recalculation
Press
OK
button to recalculate.
4. Navigate with the arrow key DOWN to
Delete All
, press ok to delete all satellite
positions. This item is only valid in “DiSEqC1.2” mode.
5. Navigate with the arrow key DOWN to Limit Setup, press
OK
button.
Limit Setup
Set East/West limit. Select East Limit/West Limit by
LEFT/RIGHT
button.. Press
OK
button to limit.
Summary of Contents for XO-40-S
Page 2: ...Copyright Kjaerulff 1 Digital A S www kjaerulff1 com...
Page 80: ......
