- 18 -
DiSEqC 1.2: You may press the red key to switch to this
scan mode. This menu provides an additional adjustment
for your motor.
z
Use the cursor keys
▲
▼
◄
and
►
to move through
the menu, the “OK” button to choose your options.
z
After inputting all necessary data, press the green
key and choose Scan Type to conduct the scan
.
LNB Setup:
z
Type: Select the LNB type installed
z
Power: Please refer to your LNB specification for the
setting which is customized to your LNB type.
Choose to turn on or off the Power of the LNB.
z
22 KHz: Turn on or off the 22 KHz setting.
z
Tone: Select tone burst A or B
z
DiSEqC: Select the DiSEqC positions A/B/C/D
Press “OK” to confirm your settings.
System
The System menu allows you to conduct the following
options:
z
Password
z
Information
z
CI Status
z
Set Defaults
Password
Password Setting Menu allows you to change the
password for the receiver using the numeric keys.
z
Enter the Current Password.
z
Enter the New Password.
z
Confirm the new password.
Note
: The default password of this receiver is 0000
