page 7
M e n u b u t t o n
Manual tune
Use the
MENU
button and
TUNING DIAL
to choose the Manual Tune Menu.
Turn the
TUNING DIAL
to see the different
channels that are available.
When you see the channel you want to use,
press the dial. The
Signal Strength Meter
will appear:
The bar in the middle of the meter shows
you the minimum signal strength needed
for good DAB reception. The grey bars will
go up and down, showing you the
changing signal strength as you adjust the
aerial and radio position.
To turn off the Signal Strength Meter, press
the
TUNING DIAL
.
Note
You can turn on the Signal Strength Meter any time, simply by
pressing the
TUNING DIAL
whilst any DAB radio station is playing.
3
Software version
Use the
MENU
button and
TUNING DIAL
to choose Software Version.
This will display the version of software
that has been used in your radio.
4
Factory reset
To return the radio to its factory settings, with all stations and presets
cleared:
Press the
MENU
button and hold it in for two seconds.
The LCD screen will display a message asking if you really want to do
this. To confirm, press the
TUNING DIAL
, and the radio will be returned to
its factory settings.
5
signal strength low
signal strength OK