INSTALLATION
Antenna outdoor placement:
Before installation, please make sure you take the necessary precautions when drilling in
and installing the antenna outdoor.
1. Indoor/Outdoor wooden wall Mounted installation:
Step 1.
Mark the fixing position with a pencil
or other (use the fixing base to mark
the position)
Step 2.
Use the enclosed screws, using
screw driver to fix these screws
through the base and fix on the wall.
Step 3.
Fix the main unit on the fixing base.
2. Indoor/Outdoor concrete or RC wall Mounted installation:
Please ensure the drill bit is fixed propperly and wear eye protection goggles
when using the electric drill, to prevent serious injuries if the bit should break or
be loose.
Step 1.
Mark the fixing position and use a
6mm drill bit to drill a 35mm deep
hole. Clean hole.
Step 2.
Take plastic plug, hammer into the
hole.
Step 3.
Take out the screws, screw them
through the base into the plastic
plug.
Step 4.
Fix the main unit (Antenna) on the fixing base.
Condition: Powering the Antenna by STB (Set-top-Box) or Digital TV
(The STB and TV must support DC 5V power supply to antenna function.)
Step 1.
Take out the DA-5100 main unit.
Step 2
. Follow your desired antenna
installation steps above.
Step 3.
Place the main unit to the fixing
base; fasten the screw on the
back of main unit.
Step 4.
A rubber cover is included in the
package for outdoor installation.
If using a longer coaxial cable for
outdoor installation, please
attach the rubber cover on the
cable.
STB or
Digital TV
Coaxial Cable
Indoor
Outdoor
Water-Drop Loop
(Recommended)
