This MAXIMUM
®
Air-powered Gravity-feed Spray Gun is an HVLP or
high-volume low-pressure sprayer. This tool applies paint with less force,
reducing the bounce of the material from the surface to be painted. It
features a stainless steel needle and nozzle to accommodate a variety of
coatings. The spray gun is capable of forming very large patterns.
11
10
model no. 058-9373-2 | contact us 1-888-670-6682
CAUTION!
Potential hazard that may result in injury or damage
to equipment.
• Incomplete or improper cleaning could cause
function failures and a degradation of the tool.
Failure to comply may result in injury or damage
to equipment.
Air Compressor
Size and Power
1 1/2–2 HP 2 1/2–3 HP 3 HP and more
5–6 Gallons
8–11 Gallons
15 Gallons
and more
Light-duty and
intermittent use
Light-duty and
intermittent use
Medium-duty and
intermittent use
Light-duty and
intermittent use
Medium-duty and
intermittent use
Heavy-duty and
continuous use
Light-duty and
intermittent use
Medium-duty and
intermittent use
Heavy-duty and
continuous use
Compatible compressors and air tool
No.
1
2
No.
5
6
7
8
Description
Description
Plastic canister
Paint adjusting knob
Pattern adjusting knob
Gun body
3
4
Air inlet plug
Air adjusting knob
Trigger
Air cap nozzle and needle
General use
Be sure to use the proper air compressor with MAXIMUM
®
air-powered
tools. The compressor should be able to supply a minimal air delivery of
5.1 CFM @ 40 PSI to ensure it can run continuously with the MAXIMUM
®
Air-powered Gravity-feed Spray Gun. Using tools or combinations of tools
that together or separately require more than the air compressor can
deliver will reduce performance and could void the compressor or tool
guarantee/warranty.
GUIDELINES FOR PROPER USE AND OPERATION
• Rotate the paint adjusting knob in a counter-clockwise direction and
open the knob when the gun is not in use. This will reduce spring
tension on the needle fluid tip.
• Clean the Air-powered Gravity-feed Spray Gun thoroughly and slightly
lubricate it, after use and before storage.
Storage
TM
