background image

11

10

model no. 

058-9342-6

 |  contact us 1-888-670-6682

No.                

1

2

Magazine 

Spacer wheel for depth control

Hammer striking area - whack 

3

No. 

4

5

Magazine pusher latch

This MAXIMUM

®

 Air-powered 2-in-1 Flooring Nailer drives 15-gauge staples 

1 1/2 to 2" (38 to 50 mm) long with a 1/2" (12.7 mm) crown, and "L" shaped 
cleats and nails that are between 1 1/2 and 2" (38 and 50 mm) in length. It 
features a die-cast aluminum housing and a comfortable handle for optimal 
control and comfort, even during extended use. It is well balanced for 
stability, and ergonomically designed with a longer handle for ease of 
operation. It also features a hardened driver blade for longer life, a 
composite base to eliminate stretches and damage to surfaces, and
economical air consumption with low noise. This Air-powered 2-in-1 

Flooring Nailer is specifically designed for installing hardwood flooring.

General use

Compatible compressors

GUIDELINES FOR PROPER USE AND OPERATION

Be sure to use a proper air compressor with MAXIMUM

®

 Air-powered tools. 

The compressor should be able to supply a minimal air delivery of 6.36 
CFM @ 90 PSI to ensure the compressor can run continuously with the 
MAXIMUM

®

 Air-powered 2-in-1 Flooring Nailer.

Air Compressor
Size and Power

1 1/2–2 HP                2 1/2 HP                   3+ HP

4–5 Gallons

 

6–11 Gallons 

15+ Gallons

Light-duty and

intermittent use

Light-duty and

intermittent use

Medium-duty and

intermittent use

Light-duty and

intermittent use

Medium-duty and

intermittent use

Heavy-duty and

continuous use

Light-duty and

intermittent use

Medium-duty and

intermittent use

Heavy-duty and

continuous use

Air inlet plug

Description

Description

cap

Wood Density

 Nail Size                                   Compressor Air Pressure

>

0.6 g/cm

3

<

1 1/4" (32 mm) staples

1 1/4" (32 mm) staples

<

3/2" (38 mm) L nails

3/2" (38 mm) L nails

90

120

90

110

0.6 g/cm

3

<

1 1/4" (32 mm) staples

1 1/4" (32 mm) staples

<

3/2" (38 mm) L nails

3/2" (38 mm) L nails

75

110

75

100

TM

PSI (6.2 bar)

PSI (6.2 bar)

PSI (8.3 bar)

PSI (7.6 bar)

PSI (5.2 bar)

PSI (5.2 bar)

PSI (6.9 bar)

PSI (7.6 bar)

Summary of Contents for 058-9342-6















Reviews: