background image

11

10

•     Do not disassemble charger. Take it to a service agent when service or repair is 

required. Incorrect reassembly may result in a risk of electric shock, electrocution 

or fire.

•     To prevent the risk of electric shock, unplug the charger from the outlet before 

attempting to clean it. Only removing the battery pack from the charger will not 

reduce this risk.

•     DO NOT store or use the tool and battery pack in locations where the temperature 

may reach or exceed 50°C (122°F), which can lead to deterioration of the storage 

battery.

•     The charger is designed to operate on standard household electrical power (120 

V~). Do not attempt to use it on any other voltage.

WARNING!

Upon removal, cover the battery pack’s terminals with heavy-duty 

adhesive tape. Do not attempt to destroy or disassemble.

IMPORT

ANT INFORMA

TION

model no. 054-8254-0  |  contact us 1-888-670-6682

ADDITIONAL INFORMATION ON BATTERY AND CHARGER

•     The battery pack is not fully charged out of the carton. First read the safety 

instructions and then follow the charging notes and procedures.

•     The longest life and best performance can be obtained if the battery pack is 

charged when the air temperature is 15–25°C (59–77°F). Do not charge the battery 

pack where the air temperature is below 0°C (32°F) or above 45°C (113°F). This is 

important and will prevent damage to the battery pack.

•     Do not incinerate the battery pack even if it is seriously damaged or is completely 

worn out. The battery can explode in a fire.

•     Never attempt to open the battery pack for any reason. If the plastic housing of the 

battery pack breaks or cracks, immediately discontinue use and do not recharge.

•     The length of service from your battery will depend on the type of work you 

are doing. The battery has been designed to provide maximum trouble-free life. 

However, like all batteries, it will eventually wear out.

•     To obtain the longest possible battery life, we suggest the following:

-     Store and charge your battery in a cool area. Temperatures above or below 

normal room temperature will shorten battery life.

-     Never store the battery in a discharged condition. Recharge it immediately after 

it has been discharged.

•     All batteries gradually lose their charge. The higher the temperature, the quicker 

they lose their charge. If you store your tool for long periods of time without use, 

recharge the battery every month or two. This practice will prolong battery life.

BATTERY PACK REMOVAL AND PREPARATION FOR RECYCLING

To preserve natural resources, please recycle or dispose of batteries properly. Local, 

provincial or federal laws may prohibit disposal of lithium-ion batteries in ordinary 

trash. Consult your local waste authority for information regarding available recycling 

and/or disposal options.

S

AFETY INS

TRUCTIONS 

Summary of Contents for 054-8254-0















Reviews: