5
SprayMate HVLP ST610EU TNT
EU
9. Start-up
Before connecting to the power supply, be
sure that the supply voltage is identical with
the value given on the rating plate.
1. Unscrew the container from the spray
attachment.
2. Prepare spray tanning solution according
to manufacturer's instructions and pour
into the container.
3. Screw the container firmly onto the spray
attachment.
4. Connect the front part of the gun and the
gun handle to each other. (Fig. 2)
5. Mount the air hose (Fig. 3, a + b).
6. Place the turbine only on a clean, flat
horizontal surface. Otherwise, the device
may suck in dust, etc.
7. Press the ON/OFF switch at the turbine.
(Fig. 4)
10. Operation
How the Spray Tanning system is handled,
including preparation of the work place
and spray tanning solution as well as the
final result, is the sole responsibility of
the operator.
MaxiMist Tanning Systems excludes any
liability for damage which may arise from
overspray, applica-tion errors, touch-ups,
or non-compliance with the instructions
provided here.
•
Turn the material control (Fig. 5, 1), in
order to adjust the desired delivery rate.
lower material volume (-):
turn anti-clockwise
higher material volume (+):
turn clockwise
Your goal is a 10 cm wide spray pattern
spraying 10 cm away.
2
➟
3
a
b
➟
4
5
1
