background image

2

SprayMate HVLP ST610EU TNT

EU

• 

DO NOT let children play with the Spray Tanning System.

• 

NEVER direct the spray gun at animals.

• 

Ensure that the spray area is well ventilated.

• 

DO NOT breathe in spray tanning lotion. Wearing nasal plugs is recommended.

• 

DO NOT spray into the eyes.

• 

If spray tanning lotion is sprayed into the eyes, wash them out with water immediately 

and consult a doctor.

• 

DO NOT spray spray tanning lotion into open wounds or onto damaged skin.

• 

Cover your hair when spraying your face. Otherwise bleached hair in particular could 

be stained by the spray tanning lotion.

• 

NEVER immerse the Spray Tanning System under water.

• 

WARNING: NEVER use your Spray Tanning System near bath tubs, shower 

trays or other receptacles that contain water. 

 

• 

ALWAYS remove the power plug after use, if the Spray Tanning System is located near 

a washbasin or another water source. Water always represents a hazard even when 

the system is switched off.

• 

As additional protection, the installation of a residual current protective device (FI/

RCD) with a rated tripping current of no more than 30 mA is recommended in the 

bathroom circuit. Ask your installer for advice. 

• 

NEVER operate spray tanning system if cord or plug is damaged.

• 

ALWAYS remove the power plug before cleaning the system.

• 

Only use genuine spare parts from the manufacturer. With original MaxiMist 

accessories and spare parts, you have the guarantee that all safety regulations are 

fulfilled.

• 

NEVER open the Spray Tanning System yourself to carry out electrical repairs! 

• 

DO NOT place the spray gun on its side, as material could leak out.

4. Processable materials

Liquid spray tanning solution

i

Only use spray tanning solution up to the expiry date specified on the package. 

12 M

means, for example, that the substance can be used for 12 months after 

opening. Actual date of opening needs to be noted by the user and marked 

on the container or package. 

5. Non-processable materials

All materials not approved for skin treatment

Summary of Contents for SprayMate TNT HVLP ST610EU

















Reviews: