www.maximatecc.com
Loose mounting bolts are the most common reason for excessive vibration. Mounting bolts
may become loose due to improper techniques such as missing lock washers, over
tightening or under tightening. Proper tightening requires clean dry bolts, and a torque
wrench.
When CCpilot VI or any device is installed in a vehicle environment it is important that the
installation is traffic-safe. maximatecc does not recommend that CCpilot VI or its
accessories are used actively by the driver or operator when a risk of injury to people, or
damage to property, is present.
1.12
Cables
Cables shall be installed in such a way that they don’t run any risk of being damaged, pinched or
worn.
Avoid bending and twisting cables
Strain-relief on cables near the connection to the respective unit
Properly snap the connectors to give good contact and avoid unnecessary strain