27
Daily maintenance should be carried out by people informed about the safety instructions
as written below. Before doing this, first disconnect the power supply and water
connections.
Daily maintenance:
Daily maintenance should be carried out by the user. In order to
clean up the machine, this maintenance should be carried out at the end of the day.
1. Wash and rinse arms should be disconnected and the remaining scraps in these
arms should be removed by using water, air pressure, a brush or fine wire. After
cleaning them, put them back in their places.
2. As long as there is water in the tank/machine, the filter may not be removed!
3. Scraps remaining in the washing tank should be removed and the tank should be
cleaned (do not start a new washing program before putting back the scrapfilter).
4. If the time between two washing operations exceed 5 hours, remove the drain pipe
and wait for all the water to be drained.
5. The scrapfilter should be removed and cleaned properly with enough water, after
draining the dirty water in the tank. Do not forget to put the filter back in place
before starting a new washing program or refilling the machine with water.
6. Clean the watertank with a sponge or soft cloth and plenty clean water.
7. After cleaning the machine, first put all the parts back in to their respective places. If
you forget to do so, this can have severe consequences for the machine, which is
not covered by the guarantee.
8. Make sure the machine stays calcium and dirt free. When the machine is not
cleaned regularly, this can influence the quality and performance of the machine.
Periodic maintenance should be carried out by the user.
