25
Connect all the cables and hoses (power-, water supply and water drain) according
to the installation instructions.
Use the on/off switch to turn on the machine. The machine will automatically start
filling with water. This will also stop automatically as soon as the correct water level
has been reached. Then the machine will start heating the water, which will take
another 25-30 minutes. Make sure the filter and drain pipe are in place when the
machine is filling with water.
After 30-45 minutes the machine will have filled with water and heated it. Then it is
ready to start washing the glasses. If you start to wash earlier, the dishes will not be
cleaned properly due to low water temperatures. During the rinsing (last 10-20
seconds of the program) the program warning lamp will light up (left lamp/light).
The dispensing units (in the VNG350 Ultra) will automatically add detergent and
rinsing liquid. If you want to use more or less, this can be changed with the white
screw on the dispensing units as shown below.
Rinsing dispenser
Detergent dispenser
You have to make sure the rinse hose and detergent hose are properly placed in
the correct cans.
When manually adding detergent, make sure you add it after the water has been
heated. You can add this in the washing tank. Use the dose advised on the
package of the detergent you are using.
Before placing the glasses and saucers in the machine, make sure you first remove
large food scraps with a brush or sponge. When that is done, shortly rinse them and
place them in the basket. Then place the basket in the machine. Do not use any
