6
WHEN TO CLEAN THE AIR FILTER
CLEANING THE AIR FILTER
HOW TO FIX THE BRACKET OPENLY
IMPORTANT: ONLY USE ORIGINAL FILTERS; DIFFERENT
FILTERS MAY AFFECT THE DEVICE EFFICIENCY AND/OR
CAUSE FAULTS.
IMPORTANT: WE RECOMMEND TO USE ONLY
ORIGINAL FILTERS, DIFFERENT FILTERS COULD
CHANGE THE EFFICIENCY OF THE APPLIANCE AND
/ OR CAUSE IT TO MALFUNCTION.
•
Even the room where you use the air purifier may
extend or shorten the air filter life. If you use the air
purifier in a polluted environment, you should change
the air filter more often.
•
If the air pollution in your environment is very high,
there is a possibility that the filter is not fully effective
and must be replaced.
1. Turn off the purifier and disconnect the plug power
supply, then place it on a flat and stable surface (fig.a)
2. Unscrew the two nuts counterclockwise under the
support base. (fig.a).
3. Remove the base by sliding it off (fig.b).
4.
Remove the air filter and wash it with water.
5.
Clean any residual dust with a cloth inside the
housing.
6. Reposition the air filter once dry (fig.d).
7. Put back the support base and screw the nuts.
8. Turn the air purifier always resting it with the base on a
flat and stable surface.
1. Turn off and disconnect the power supply plug of the air
purifier, then turn it upside down resting it on a stable flat
surface (fig.a).
2. Unscrew the central screw counterclockwise under the
support base (fig.a).
3. Remove the base, and fix it to a wall with suitable plugs
and screws (fig.b)
4. Fix the purifier to the support base by screwing it on the
decentralized hole (fig. C - d).
