6
WHEN TO CLEAN THE AIR FILTER
CLEANING THE CATALYTIC FILTER
CLEANING THE AIR FILTER
• The environment in which the air purifier is used can
also lengthen or shorten the operational life of the
air filter. Use the air purifier in environments with
relatively polluted atmosphere could mean that you
need to clean or change the air filter more often.
• The sponge filter should be cleaned approximately
once a month
• The catalysts should be washed approximately every 6
months.
1. Turn off the purifier and disconnect the plug power
supply, then place it on a flat and stable surface (fig.a)
with the front part facing down, making sure you don't
you crawl.
2. Unhook the magnetic filter cover located under the
lower part (fig.b).
3 Remove the filter cover from the side.
4. Remove the air filter and wash it with water.
5. Clean any residual dust with a cloth inside the
housing.
6. Once clean and dry, replace the filter making sure that
the sponge does not touch the fans, then put the filter
cover on by adhering the magnet to the correct
direction.
1. Turn off the purifier and disconnect the power plug
power, then place it on a flat and stable surface (
fig. a
)
with the front facing downwards, doing be careful that it
does not crawl.
2. Lift the covers to access the catalyst compartment (
fig. C
)
3. Remove the catalyst filter, handling it with care and
doing be careful not to drop it, it is fragile.
4. Clean any residual dust with a dry cloth inside the filter
housing.
5. Wash the catalyst with hot water, or boil it for about 30
minutes. Do not use degreasing products, soaps, solvents
or other.
6. After allowing the catalyst to cool, remove it from the
water and dry it well and then put it back in the
appropriate compartment and close the magnetic cover.
IMPORTANT: WE RECOMMEND TO USE ONLY
ORIGINAL FILTERS, DIFFERENT FILTERS COULD
CHANGE THE EFFICIENCY OF THE APPLIANCE AND /
OR CAUSE IT TO MALFUNCTION.
