Spangenberg International B.V. – Rendementsweg 24P – 3641 SL Mijdrecht – Holland – T. +31 (0) 297 253969 – F. +31 (0) 297 256445
–
www.spangenberg.nl
•
Fill the appliance with the desired amount of oil.
•
Warning! Make sure the oil level is at least filled till the minimum level and not higher
than the maximum level. This is shown inside the inner case.
•
Warning! Do not use the fryer without oil, otherwise the appliance might go defect.
•
Place the basket in the inner case and close the fryer with a top cover.
•
Follow the steps in chapter ‘Operation’.
Operation
•
Plug the appliance into the main socket.
•
Use the ‘On /Off’ button, which is located on control panel of the appliance, to start the
appliance. The indicator orange will start burning.
•
Use the temperature switch on the control panel at the appliance to achieve the desired
temperature. The orange indicator will start burning and will turn off when the desired
temperature has been reached.
•
Take the top cover off the appliance.
•
Place the desired food in the basket and lower it slowly into the oil.
•
Warning! It is sensible to put only defrozen products in the oil; this will reduce the risk of
splashes.
•
When you are finished, close the appliance again with the top cover.
•
When the appliance is not used, turn it off by using the ‘On /Off’ button.
•
When the appliance is not being used, please remove the plug from the main socket.
•
When the appliance and the oil have cooled down you can move the fryer. When you
want to put it away, it is possible to leave the oil in and put it away with the top cover on
the appliance.
•
Warning! Move the appliance never while using it, the oil can be hot and you can burn
yourself. Wait with moving till the oil has cooled down totally.
Cleaning and maintenance
•
Always remove the plug from the socket before any cleaning or maintenance is being
done to the appliance.
•
Warning! Let the oil cool down before any cleaning or maintenance is being done to the
appliance.
•
To change the oil is very easy:
MF 1 x 4L and MF 2 x 4L: Take the basket and the heating element out of the appliance.
Thereafter you can remove the inner case and empty it.
MF 1 x 8L, MF 2 x 8L, MF52 and MF76: Open the tap and catch the oil with a bucket.
