Spangenberg International B.V.
– Nijverheidsweg 19F – 3641 RP Mijdrecht – Holland – T. +31 (0) 297 253 969 – F. +31 (0) 297 256 445
Installation
1.
The appliance must be positioned on a flat and stable surface.
2.
Choose a location where the appliance is not exposed to direct sunlight, or close to a direct source of heat
such as a cooker, oven or radiator.
3.
When positioning the appliance, maintain a distance of 10 cm (4 inches) between the appliance and walls or
other objects for ventilation and ease of use.
4.
Position the appliance in such a way that the plug is accessible at all times.
5.
Assemble any required parts (if applicable).
6.
The shelves can be adjusted, arrange the shelves according to your requirements.
7.
Plug the power plug into a grounded and compatible socket.
8.
Let the unit operate empty for at least 1 hour before placing items inside the Bottle Cooler.
Operation
•
This appliance employs a Forced Air Circulation cooling system. If the circulation of air is obstructed, cooling
will be less effective. Pay attention to the following points:
o
Make sure the cold air outlet and air inlet are free of obstruction.
o
Keep some space between the items inside and the walls, doors and ceiling.
o
Do not store items on the floor, only use the shelves.
o
Reduce the time that the doors are open to a minimum.
•
The temperature inside should stay between 0 - 10 °C. Adjust the thermostat settings accordingly. The
ambient temperature will greatly affect which setting is needed to achieve this temperature range.
•
Do not set the thermostat to low either, this may cause ice formation and eventually damage to the
appliance.
•
Condenstation is collected in the drain tray and should evaporate naturally. However, in humid
environments there will be more condensation and thus you should check and empty the drain tray
regularly.
•
When not in use, switch off the appliance by removing the plug from the power socket.
•
Clean the appliance according to instructions after use
(see chapter “
Cleaning and Maintenance
”)
.
