Spangenberg International B.V.
– Nijverheidsweg 19F – 3641 RP Mijdrecht – Holland – T. +31 (0) 297 253 969 – F. +31 (0) 297 256 445
Product Specific Safety Regulations
•
This appliance may only be used for its intended purpose: To cool, store and display beverages.
•
Keep all ventilation openings, in the appliance enclosure and built-in structure, clear of obstruction.
•
Use a dedicated power socket, do not use extension cables or socket boxes.
•
Do not store flammable or volatile substances inside or near this appliance.
•
Open the door using the handle and do not apply excessive force to the glass surfaces.
•
Never hang from the door or climb on top of the appliance.
•
Do not store heavy objects on top of the appliance.
•
Make sure the shelves are mounted en secured in place properly. Maximum load per shelf: 25 kg.
•
Do not switch on the appliance immediately after it was switched off, wait for 5 minutes before switching
the appliance back on.
First Time Use
•
Unpack and inspect your appliance immediately after receipt. If there are any latent defects or damage to
the appliance then immediately contact your supplier. Save all packaging materials in case the appliance
needs to be returned or inspected by the freight carrier.
•
Remove any protective film from all surfaces (if applicable).
•
Read this instruction manual completely before attempting to install and operate this product. When in
doubt, contact your supplier.
•
To ensure all coolant and oil in the cooling system has precipitated properly, keep the appliance in the
upright position for several hours before switching it on. If the appliance was tilted horizontally prior to or
during delivery, keep it upright for at least 8 hours before switching it on.
•
If your appliance is supplied with a factory fitted molded plug then you may plug the unit into a standard
electrical outlet. Make sure that the voltage of the appliance and the wall outlet are compatible. If your
appliance is not supplied with a factory fitted molded plug then a qualified electrical engineer must be
contracted to wire the unit to the power supply.
•
Before using the appliance for the first time, it is recommended to clean the appliance according to
instructions
(see chapter “
Cleaning and Maintenance
”
).
