Spangenberg International B.V.
– Nijverheidsweg 19F – 3641 RP Mijdrecht – Holland – T. +31 (0) 297 253 969 – F. +31 (0) 297 256 445
Cleaning and Maintenance
•
Maintenance and repairs should only be done by qualified technicians.
•
Regularly check and clean the appliance, its parts and accessories (if aplicable).
•
Regularly check the power plug and power cable for damage. If either is damaged do not use the appliance.
Instead, have it repaired by a certified electrical engineer.
•
Always switch off and disconnect the power supply before cleaning or maintenance.
•
ATTENTION! Never use aggressive cleaning agents or abrasives. Do not use solvents or petrol based cleaning
agents. Some cleaning agents may leave harmful residues or cause damage to the machine.
•
ATTENTION! Do not use any scourer and sharp or pointed objects during cleaning, this may cause damage
to the machine.
•
ATTENTION! Never hose down the machine or immerse it in water or any other liquid, instead wipe the
exterior with a damp cloth. Do not use a steamer to clean the appliance
•
ATTENTION! Never let the power cable or power plug get wet or damp.
•
To gain access to the squeezing & cutting assembly remove the transparant plastic front cover, by first
undoing the orange screws located on the side.
•
Remove the knife assembly [A+B]. The knife is sharp, handle with care.
•
Slide both peelers out of their bracket [C]. Be carefull not to damage the peelers or squeezing assembly.
•
Undo the four screws [D] which are holding the squeezing assembly in place.
•
Remove the squeezing assembly [E+F].
•
Clean the parts using a soft brush or cloth, warm water and a mild food safe detergent (do not clean in
dishwasher). Whipe down the machine with a damp cloth and always dry the appliance and accessories
after cleaning, using a soft cloth.
•
Reassemble the parts in reverse order [E+F,D,C,A+B] and mount the front cover back in position. Make sure
the front cover is mounted properly and the safety switch is activated by it.