Spangenberg International B.V.
– Nijverheidsweg 19F – 3641 RP Mijdrecht – Holland – T. +31 (0) 297 253 969 – F. +31 (0) 297 256 445
Operation
•
Check if the machine is assembled correctly
(see chapter “
Installation
”)
.
•
Switch on the appliance by using the
“ON/OFF” switch
located on the side of the appliance.
•
ATTENTION! Make sure the meat is free of bone and tough tendon.
•
ATTENTION! Do not process frozen products.
•
Cut the product into pieces that fit through the shaft easily.
•
ATTENTION! Do not push product through the shaft while it is switched off.
•
ATTENTION! Only use the supplied pusher to push product through the shaft. Other objects may cause
damage to the appliance.
•
WARNING! Never push product through the shaft by hand. This may cause serious injuries.
•
Gently push your product through the shaft. Applying too much pressure may damage the appliance.
•
Collect the minced product at the exit.
•
When the appliance is not being used, turn off the machine by
using the “ON/OFF” switch
.
•
If the appliance will not be used for a longer period, please remove the plug from the main socket. Clean the
appliance according to
instructions (see chapter “
Cleaning and Maintenance
”)
.
Cleaning and Maintenance
•
Maintenance and repairs should only be done by certified engineers.
•
Regularly check and clean the appliance, its parts and accessories (if aplicable).
•
Regularly check the power plug and power cable for damage. If either is damaged do not use the appliance.
Instead, have it repaired by a certified electrical engineer.
•
Always switch off and disconnect the power supply before cleaning or maintenance.
•
Disassemble the grinding mechanism and hopper tray.
•
ATTENTION! Never use aggressive cleaning agents or abrasives. Do not use solvents or petrol based cleaning
agents. Some cleaning agents may leave harmful residues or cause damage to the machine.
•
Clean the accessories using warm, soapy water and a mild food safe detergent. Whipe down the exterior
with a damp cloth. Always dry the appliance and accessories after cleaning using a soft cloth.
•
ATTENTION! Do not use any scourer and sharp or pointed objects during cleaning, this may cause damage to
the machine.
•
ATTENTION! Never hose down the machine or immerse it in water or any other liquid, instead wipe the
exterior with a damp cloth.
•
ATTENTION! Never let the power cable or power plug get wet or damp.
