Spangenberg International B.V.
– Nijverheidsweg 19F – 3641 RP Mijdrecht – Holland – T. +31 (0) 297 253 969 – F. +31 (0) 297 256 445
•
ATTENTION! As long as the power plug is in the electrical socket the machine is connected to the electric
grid.
Product Specific Safety Regulations
•
This machine may only be used for its intended purpose: Cooking food products.
•
WARNING! This appliance will become hot when operational. Keep away from flammable materials, liquids
and gasses.
•
Only touch the door handle and control panel during operation. It is also recommended to wear protective
gloves when using this appliance.
•
ATTENTION! The appliance will remain hot for some time after it has been switched off, handle with care.
First Time Use
•
Unpack and inspect your machine immediately after receipt. If there are any latent defects or damage to
the machine then immediately contact your supplier. Save all packaging materials in case the machine
needs to be returned or inspected by the freight carrier.
•
Remove any protective film from all surfaces (if applicable).
•
Read this instruction manual completely before attempting to install and operate this product. When in
doubt, contact your supplier.
•
If your machine is supplied with a factory fitted molded plug then you may plug the unit into a standard
electrical outlet. Make sure that the voltage of the machine and the wall outlet are compatible. If your
machine is not supplied with a factory fitted molded plug then a qualified electrical engineer must be
contracted to wire the unit to the power supply.
•
Before using the appliance for the first time, it is recommended to clean the appliance according to
instructions
(see chapter “
Cleaning and Maintenance
”
).
Installation
1.
The machine must be positioned level on a flat and stable surface. The appliance might function less
effectively if not level.
2.
Choose a surface where the machine is not exposed to direct sunlight, or close to a direct source of heat
such as a cooker, oven or radiator.
3.
When positioning the appliance, maintain a distance of 10cm (4 inches) between the appliance and walls or
other objects for ventilation and ease of use.
4.
Position the machine in such a way that the plug is accessible at all times.
5.
Install the required parts & accessories (if applicable).
6.
Plug the power plug into a grounded and compatible socket.