Maxim Integrated
Page 20 of 39
Starting the ECG Measurement
1.
Select “ECG” under Connected Devices and click on “Launch Tool.”
2.
Check the box for
“Log to File” to save the data to a file.
3.
Check the box for “Log to Flash” to save the data to the on-board flash. Data is not
streamed to the GUI while Flash Logging is enabled.
4.
Select the desired filters.
5.
Adjust the ECG parameters. The default parameters can be used for the first time. Refer
to the MAX30001 data sheet for a detailed explanation of the parameters.
6.
Click on “Start Monitoring.”
Note: There is no display in ECG mode because the noise from the display interferes with the
measurement.
Figure 19. Start the ECG measurement.
Summary of Contents for MAXREFDES101
