40
Maxim Integrated
Evaluates: DS34S132
DS34S132 Evaluation Kit
Table 4-6. SAToP Bundle Parameter Descriptions (continued)
PARAMETER
DESCRIPTION
POSSIBLE VALUES
Enable JB Reset
A mechanism that enables setting an optimum level for the jitter
buffer working level. It enables the reset of a bundle, until a satis-
factory jitter buffer level is reached, to minimize the delay.
Off:
Bundle reset is disabled and
the working level of the jitter buffer is
determined by the timing the bundle
was first opened
On N Times:
Up to N times of bun-
dle reset is allowed
Endless:
Bundle reset is allowed
with unlimited number of resets
Default: On N Times
Window Size
[2 - 127]
The maximum number of conditioning Ethernet packets that can
be inserted upon a loss of received Ethernet packets. If the differ-
ence in packet SN is greater than the configured window, there is
no insertion of conditioning packets.
2–127
Default: 83
Number Of Outer
Cookies
Determines if L2TPV3 cookies are used and how many.
Note:
This parameter is displayed only when PSN Type = L2TPV3.
0:
L2TPV3 cookies are not used
1:
One L2TPV3 cookie is used
2:
Two L2TPV3 cookies are used
Default: 0
Cookie 1
Optional field that contains a randomly selected value used to val-
idate association of the packet with the expected bundle identifier.
Note:
This parameter is displayed only when PSN Type = L2TPV3
and Number of Outer Cookies is 1 or 2.
0–4294967295
Default: 0
Cookie 2
Optional field that contains a randomly selected value used to val-
idate association of the packet with the expected bundle identifier.
Note:
This parameter is displayed only when PSN Type = L2TPV3
and Number of Outer Cookies is 2.
0–4294967295
Default: 0
Number Of Outer
Labels
Determines if MPLS outer labels are used and how many.
Note:
This parameter is displayed only when PSN Type = MPLS.
0:
MPLS outer labels not used
1:
One MPLS outer label is used
2:
Two MPLS outer labels are used
Default: 0
MPLS Outer
Label 1
MPLS Outer Label (only when not equal to 0) identifies the MPLS
LSP, which is used to tunnel the TDM packets through the MPLS
network.
Note:
When equal to 0, only the Inner Label exists. This parameter
is displayed only when PSN Type = MPLS and Number of Outer
Labels is 1 or 2.
0–1048575
Default: 0
MPLS Outer
Label 2
MPLS Outer Label (only when not equal to 0) identifies the MPLS
LSP, which is used to tunnel the TDM packets through the MPLS
network.
Note:
When equal to 0, only the Inner Label exists. This parameter
is displayed only when PSN Type = MPLS and Number of Outer
Labels is 2.
0–1048575
Default: 0
