Maxi Comet Executive Exec-56-G, Instruction Manual

Page: 52 / 244

Operating Guidelines Comet Executive Gas
3-10
Ironing Cylinder
• Use the entire length of the heated
ironing cylinder. This is especially
important when finishing pillowcases.
• Work from side to side to prevent dirt
and heat buildup at the ends of the
ironing cylinder. This preserves padding
life.
• Rewax the ironing cylinder before
ironing thicker flatwork such as
tablecloths. This will result in a better
finish quality. This is not necessary for
chrome ironing cylinders.
Clearing a Jam Safely
WARNING
The ironing cylinder will burn
you on contact.
Never reach in, on, or near
the ironing cylinder.
If a piece of flatwork becomes jammed, use
the following procedure to clear the jam safely:
1. Stop feeding flatwork.
2. Wait for flatwork already in the unit to exit.
3. Turn SPEED CONTROL knob to the
slowest speed.
WARNING
DO NOT attempt to remove
jammed linen while unit is
jogging or moving.
Serious Injury Could Result.
4. Stop the unit by pressing a red safety
STOP button.
5. Turn the TEMPERATURE control dial
to OFF.
6. If the jammed linen can be removed easily,
clear the jam.
TOC INDEX