13
QM00152-1
When the projector connects network, the projector can be controlled with
RS-232C commands from the computer with web browser.
For details of RS-232C commands, refer to RS-232C Communication / Network
command table (
19
).
Command Control via the Network
LAN
USB wireless adapter
LAN cable (CAT-5 or greater)
Connection
1.
Turn off the projector and the computer.
2.
If you use wired LAN, connect the projector's
LAN
port to the computer's
/$1SRUWZLWKD/$1FDEOH8VHWKHFDEOHWKDWIXO¿OOVWKHVSHFL¿FDWLRQVKRZQ
LQ¿JXUH,I\RXXVHZLUHOHVV/$1LQVHUWWKH86%ZLUHOHVVDGDSWHULQWRRQHRI
the
USB TYPE A
ports of the projector.
3.
Turn the computer on, and after the computer has started up turn the
projector on.
NOTE
• If data is transferred via wireless and wired LAN at the same
time, the projector may not be able to process the data correctly.
Command Control via the Network
