EN-13
EN
Connect to an External Audio Device
You can connect to your audio devices,
e.g. CD player, to enjoy purely music, via
the following conections.
R
L
RCA
OPTICAL
COAXIAL
LINE IN
HDMI IN
HDMI OUT(ARC)
COAXIAL
OPTICAL
R
L
RCA
OPTICAL
COAXIAL
LINE IN
HDMI IN
HDMI OUT
Auto-on/off function is applied in this
unit. Auto-off is to facilitate people not to
control the unit when no sound is playing
in few minutes. And when there are sounds
input, the unit will switch on automatically
after few seconds. For HDMI, Auto-on
function will work with CEC only.
Warning:
If the volume of the TV or an external
device via RCA or LINE IN is too low, the
auto-off function will be triggered. When
this situation happened for 2.5 minutes, LED
source light will flash slowly on the unit for
the next 30 seconds and the unit will switch
to standby mode.
Please turn up the volume of the input source
(not the unit, but, e.g. TV or MP3 player, etc.)
slowly, until it returns to normal mode.
To avoid the auto-off being triggered
unintentionally, pre-set the source volume
higher and adjust the unit volume to a
comfortable level.
Note:
You might hear the sound over-lapping from
both the TV and the unit while following
some of the suggestion connections. To
avoid this, turn the volume of TV down to 0
or mute it.
Connections
