PA1899-01
Caution
*
3: Password may be called passcode, passkey, PIN code, etc.
●
Pairing mode lasts for approximately 3 minutes, and if it is not paired during
that time, the power will OFF.
●
Password
*3
input may be requested by your Bluetooth device. In that case,
you can pair it by entering "0000".
●
This product can simultaneously store up to 7 paired Bluetooth devices.
When more than 8 pairings are attempted, the information of the 1st
stored Bluetooth device is erased and is replaced by the newly paired
device. If you want to use a Bluetooth device whose information has been
erased, please pair it again.
*
2: If it does not connect automatically, please select "MXH-BTW510" from the list
displayed on your device.
1. When the main units are removed from the charging case, the main
units’ power turns on automatically, and the indicator LED start
flashing.
2. Activate Bluetooth on your Bluetooth device.
3. The earphone will connect automatically.
*2
After connect, the display
lamp will flash blue slowly.
<Connection after the second time onward>
At the time of purchase,
M does not fit your ears, please replace with the size S or size L earpiece in
the contents. If the earpiece does not fit correctly, it will not be possible to seal
the ear hole with the earpiece, which may cause sound leakage and no bass to
be heard. Also, if you feel that the volume is low, there is a possibility of sound
leakage.
size M earpiece are attached to the main unit. If size
<Choosing an earpiece>
<Pairing and connecting>
5
How to Use
In order to use this product, it is necessary to pair with your device.
Once pairing is done, you can connect without pairing again.
1. When the main units are removed from the charging case, the main
units power turns on automatically, and the indicator LED starts
flashing.
2. After a while, the LED of the main unit (L) starts to flash red and blue
alternately.
*1
The LED of The main unit (R) will flash slowly in blue.
3. Enable Bluetooth function on your Bluetooth device.
For details on setting, please refer to the instruction manual of the
device.
4. Please select "MXH-BTW510" from the list displayed on your
Bluetooth device.
5. When pairing is completed, the blue indicator
LED flashes slowly.
*1: When pairing is performed for the first time
after purchase, it will be in paring mode
immediately after the power is turned on.
When paring the second or subsequent
devices, it will be in pairing mode approx. 15
second after the power is turn on.
Caution
After approx. 3 minutes without Bluetooth connection, the power will
turns off automatically.
*4: If it does not connect automatically, please select "MXH-BTW510" from the
Receiving a call
Ending a call
Press the multi function button on the main unit L or R
during a call
The other party disconnects the call
Function
Operation
Depending on your device, the operation may different or may not be
available.
Caution
■
Hands free call
Press the multi function button on the main unit L or R when
receiving a call
6
The power
does not
turn on
No sound
Troubleshooting
Unable to
charge
Sound is
distorted or
interrupted
Cannot hear
the voice on
the phone
・
Insert the main units into the charging case and remove them
from the charging case
・
Please charge the product
・
Please pair and connect Bluetooth
・
Power is not turned on. Put the main unit in the charging case and
take it out
・
Check to see if the connected device supports Bluetooth profile
A2DP
・
Check if the connected device is playing
・
Please increase the volume of the Bluetooth device slowly
・
Please reduce the volume of the connected device and this unit
・
Please turn off the functions such as bass boost of connection device
・
Remove any obstacles between the connection device and this unit
・
Keep the connection device close to this unit
・
Please keep away from radio equipment or microwave ovens
・
Please press the multi function button to receive the call
・
Make sure that the Bluetooth device supports HSP
・
Insert the charging cable to the charging terminal completely
・
Remove the main units from the charging case and place the main
units in again
・
Remove dirt from the main units and charging case contacts
・
Charge within the charge temperature range
(
5°C to 40°C
）
Power ON
Pairing Mode
Remove the main unit
from the charging case, it will
be in paring mode immediately
Connected
Connected
Disconnected
Pairing
Mode
Main unit L:
Blue
light flashes
→
Blue light and
Red light flash
alternatively
Main unit R:
Blue
light flash slowly
Main unit LR:
Blue light flashes
slowly
Main unit LR:
Blue light flashes
slowly
Main unit LR:
Blue light flashes
slowly
Main unit L:
Blue light flashes
Disconnect
Pairing
complete
Connect
Disconnect the product from
your device (or disable
Bluetooth)
Pair this product from your
Bluetooth device. Please refer
to <Pairing and connecting>
After pairing is completed,
automatically connects if
Bluetooth of your Bluetooth
device is enabled
*4
Music Playback
*5: If the button is pressed at the beginning of the song, it will skip to the previous
song.
Depending on your device, the operation may different or may not be
available.
Caution
■
This operation cannot be done with this
product. Operate with the connected device
PLAY / PAUSE
Volume UP / DOWN
Function
Operation
Next song (skip to the
next song)
Previous song (return to
the beginning of the
currently playing song
*5
)
Press the multi function button on main unit
L or R twice in succession
Press the multi function button on main unit
L or R three times in succession
Press the multi function button on the
main unit L or R to operate play and pause
<The 1st Device>
<The 2nd or subsequent
devices>
1. Put the main unit L and R in the charging case.
2. Press and hold the multi function buttons of the main unit L and R for
approximately 13 seconds, and release when the blue indicator LED flashes.
3. Remove the main unit L and R from the charging case.
4. Please carry out pairing according to the procedure in How to Use
<Pairing and connecting>.
If the problem does not improve, please reset the main units. When the main
units are reset, all paired device information is erased and it will be in the state
at the time of purchase. Please pair again.
5
*1: When the main units and the charging case are fully charged, the max. playback time is 21
hours, where 1 time by the charged main units and 2 times by charging from the charging
case. Total 3 times.
※
Specifications and appearances are subject to change without prior notice for improvement.
※
This device has a lithium ion battery built in. Usage time and battery charging time are based
on our test results. It depends on the usage environment.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by Maxell Asia, Ltd. is under license. The names, logos, and
service marks are registered trademarks and trade names of maxell or their respective
owners.
Qualcomm® aptXTM audio is a product of Qualcomm Technologies International, Ltd.
aptXTM
is a trademark of Qualcomm Technologies International, Ltd., registered in the United States
and other countries, used with permission. Qualcomm® is a trademark of Qualcomm
Incorporated, registered in the United States and other countries, used with permission.
Maxell, Ltd.
30-13 Motoyoyogi-Cho, Shibuya-Ku, Tokyo 151-8527
8
Discard This Product
Disposal of rechargeable batteries in Japan
The built-in rechargeable battery can be recycled.
Do not remove the rechargeable battery yourself, please
contact our Customer Service Center.
Please refer to the JBRC website for information on
rechargeable battery collection / recycling and recycling
partners.
Caution
General
specification
Wireless
specification
Diameter 6mm
20~20,000Hz
Built-in rechargeable lithium ion battery
Continuous playback: approx. 7 hours,
Continuous standby: approx. 160 hours.
Charging case charge main units for
approx. 2 times
*1
Main Unit: Approx. 2 hours
Charging Case: Approx. 3 hours
Main Unit: Approx. 4g x 2
Charging Case: Approx. 24g
Max. 10m
Bluetooth® Ver.5.0
A2DP, AVRCP, HFP, HSP
Sealed dynamic type
SCMS-T
Max. up to 7 units
Earpieces (S/M/L 2 units each)
※
M size are attached to the main units.
Charging cable (USB-A-USB Micro-B
approx. 45cm) x1, instruction manual,
Quick start guide
Driver unit
Type
Power supply
Using time
Charging time
Waterproof level
Weight
Accessories
Communication
method
Communication
distance
Supported profile
Supported codecs
Supported content
protection
Multi-pairing
Audio frequency
response
7
Specification
SBC, aptX
TM
IPX5
（
Excluding the charging case
）
Remove the main
unit
from
the charging case,
It will be in pairing mode in
about 15 seconds. Or, after
taking out the main unit,
Press and hold the multi
button of main unit L for about
3 seconds.
■
Common function
Power On
Guidance
Sound
Power On
Remove the main units from
the charging case
Main unit L:
Blue light flashes
Main unit R:
Display Lamp
Function
Operation
<How to operate>
Blue light flashes
slowly
Main unit LR:
Blue light and
Red light flash
alternatively,
then red light
turns on and off
Main unit LR:
Red light ON
Power OFF
Power OFF
Place the main units into the
charging case
Or, press and hold the multi
function button for
approximately 6 seconds
