The operation of the control panel
10.1.1
Open menu
A.
Plug in the power supply
B.
Turn on power switch in the rear panel, and turn on the laser key or
on/off switch in the front panel
Front panel displays “
KEY ON…
”. Laser status lamp turns green from
red, and the unit enters a self-diagnostic mode. After checking, it enters
operational status and displays “
Descriptor
”.
10.1.2
Start-up main menu
Press
▲
\
▼
button and the following menu will be displayed in
sequence.
Menu # 1 -
Descriptor
Read-only menu, displays the model of this equipment
Menu # 2 -
S/N
Read-only menu, displays the serial-number
Menu # 3 -
INPUT
Read-only menu, displays the input optical power
Menu # 4 -
Set Output
Adjustable, set the output optical power
Menu # 5 -
OUTPUT
Read-only menu, displays the output optical power
Menu # 6 -
PUMP BIAS1
Read-only menu, displays the current of pump
Menu # 7 -
PUMP BIAS2
Read-only menu, displays the current of pump
Menu # 8 -
TEC1
Read-only menu, displays the current of pump in cooling/heating
situation
Menu # 9 -
TEC2
Read-only menu, displays the current of pump in cooling/heating
situation
