Safety Instructions:
1.
Before using the device, read the instructions for use and follow the instructions contained in it. The manufacturer is
not liable for damages caused by using the device contrary to its intended purpose or improper operation.
2.
Do NOT carry out any maintenance work while the machine is operating.
3.
DO NOT use the device near flammable materials or liquids.
4.
Protect the device against water, moisture and temperature below 0˚C (also during storage).
5.
This equipment is not intended for use by persons (including children) with limited physical, sensory or mental ability
or persons without experience or knowledge of the equipment, unless this is done under the supervision or in
accordance with the instructions for use of the equipment provided by persons responsible for their safety. Make sure
that children do not play with the device.
6.
In the event of damage to the device, in order to avoid a hazard, repairs may only be carried out by a specialized
repair shop or a qualified person.
In the event of a defect or malfunction, the device should be returned to the seller. Defects resulting from improper use or
caused by mechanical damage will result in the rejection of the complaint.
WARNING!
Both the lamp and the power supply may become hot during operation, this is normal and is not a malfunction. For safety
reasons, the device should not be used without supervision!
REMEMBER!
Incorrect handling may result in electric shock or fire! Do not leave the device switched on for more than a few hours! The
device is not designed for continuous operation!
Tip: Regularly clean the surface of the lamp with a soft and dry cloth.
TECHNICAL ASSISTANCE
This product is warranted in accordance with applicable laws. Contact the seller for technical support and / or service under
warranty.
INSTRUCTIONS FOR ENVIRONMENTAL PROTECTION
This product may contain substances which, if not properly disposed of, may endanger the environment and human health.
This manual aims to prevent the release of these substances into the environment and to optimize the use of natural
resources. Electrical and electronic products should not be disposed of in domestic waste, but should be collected in an
appropriate manner to enable their further proper treatment. The crossed-out wheeled bin symbol on the product and on this
page is intended to remind you to dispose of the product properly at the end of its life cycle. In this way, you can avoid the
incorrect processing of the substances contained in these products or the misuse of parts of these products, which has
harmful consequences for the environment and human health. In addition, the user can contribute to the recovery, recycling
and reuse of many of the materials in these products. To this end, producers and sellers of electrical and electronic systems
organize proper collection and utilization of this type of equipment. At the end of the life cycle of the purchased product,
please contact the seller for disposal instructions. When purchasing this product, the seller will inform the user about the
possibility of replacing the old product with a new one, provided that the new product is of the same type and has the same
functions as the previously purchased product. Alternatively, if the product dimensions do not exceed 25 cm, EEE (electrical
and electronic equipment), it can be returned to the seller without having to buy an equivalent product. Utilization of the
product in any way other than described herein is subject to penalties provided for by the legislation of the country in which
the product was disposed of. It is recommended to take additional measures for environmental protection: recycling of the
inner and outer packaging and proper disposal of used batteries. With the help of users, we can reduce the amount of natural
resources used to manufacture electrical and electronic equipment, reduce the number of landfills, and improve the quality
of life by preventing the release of potentially harmful substances into the environment.
SCOPE OF WARRANTY
The manufacturer guarantees that the MAXCOM LIGHT ML1001USB product is free from defects in materials and workmanship
for normal use within 24 months of purchase. In the event of a fault or fault, please contact your dealer or an authorized
distributor. The complaint must be accompanied by the confirmation of the product purchase.
The Guarantor will repair or replace products that do not meet the parameters set out in the Warranty within a reasonable
time free of charge.
This Warranty applies only to the first purchaser and is not transferable. It covers the territory of the Republic of Poland.
The warranty does not exclude, limit or suspend the buyer's rights arising from the provisions on warranty for defects of
goods sold
Technical and warranty support is available at www.maxcom.pl
The warranty does not cover:
Normal wear and tear, unless the damage is due to material defects or workmanship
Mechanical, thermal and chemical damages and defects caused by them.
Defects resulting from improper use, other than for the intended purpose and operating instructions; making unauthorized
changes; use or storage in a manner that does not comply with the technical specifications of the product; improper
maintenance; use of elements other than supplied or the use of any elements not intended for use with the product;
technical work carried out by unauthorized personnel.
The above refers to the principles of the guarantee for consumer goods under Directive 1999/44/EC.
If a malfunction or defect is detected. The device should be delivered to the seller from whom the product was purchased or
the Warranty service.
During the Warranty period, the service center will remove the Defect free of charge within a reasonable time by repairing or
replacing the defective Product, accessory or part at its sole discretion, provided that the user has returned the defective
Product or accessory to the Manufacturer or to an authorized service center before the expiry of the Warranty period.
SHORT DECLARATION OF CONFORMITY
DIRECTIVE 2014/35 / EU / LOW VOLTAGE DIRECTIVE / LVD DIRECTIVE:
Directive 2014/35 / EU of the European Parliament and of the Council of 26 February 2014 on the harmonization of the laws
of the Member States relating to the making available on the market of electrical equipment designed for use within certain
voltage limits. The complete declaration of conformity is available online at the following link: www.maxcom.pl This
equipment can be used in all European Union countries and in all countries where Directive 2014/53 / EU applies, without
restrictions. Commission Regulation (EC) No 244/2009 of 18 March 2009 on the implementation of Directive 2005/32 / EC of
the European Parliament and of the Council with regard to the ecodesign requirements for non-directional household lamps.
Commission Delegated Regulation (EU) 874/2012 of 12 July 2012 supplementing Directive 2010/30 / EC of the European
Parliament and of the Council with regard to energy labeling of electric lamps and lighting fittings. Commission Regulation
(EU) No 1194/2012 of 12/12/2012 on Directive 2009/125 / EC of the European Parliament and of the Council with regard to
the ecodesign requirements for directional lamps, lamps with light-emitting diodes (Journal of Laws EU L342 of 14.12.2012,
p. 1) and amendment by Commission Regulation (EU) No. 2015/1428 (Journal of Laws EU L224 of 27.08.2015, p. 1).
Directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment. 2011/65 / EU
as amended 2015/863 / EU (RoHS).
Manufacturer’s data: MaxCom S.A.
ul. Towarowa 23a
43-100 Tychy
+48 32 327 70 89
Designed in Poland
Made in PRC
