3–2
INSTALLATION
www.maxcessintl.com
GMA-BL
MI 1-916 1 B
Mechanical and
electrical installation
(continued)
The inductive servo center transducer (ISCT) orientation can be
changed on the Z12 Rod End and A Clevis models by loosening two
set screws and rotating the ring holding the transducer. The set
screws should be tightened to 0.5 Nm (4.4 lb-in). See Figure 7.
Install the sensors in the web path. Install the air lines on sensors
with air sweep.
1 ISCT
2 Set screw (2X)
Figure 7.
ISCT Orientation adjustment for Z12-Rod end and A-Clevis models
Summary of Contents for GMA-BL-1-1
Page 2: ......
