16
DRIVING DEPTH ADJUSTMENT
ALWAYS disconnect air supply before making
adjustment.
The driving depth adjustment is made by adjust-
ing the Adjustment Dial.
1
With air pressure set, drive a few nails into a
representative material sample to determine
if adjustment is necessary.
2
If adjustment is required, disconnect air sup-
ply.
3
Refer to the mark on the Contact Arm area
for direction to turn the Adjustment Dial.
4
Re-connect air supply.
TRIGGER LOCK MECHANISM
The tool is equipped with a Trigger Lock Mecha-
nism. Push and rotate the Trigger from LOCK to
the Trigger UNLOCK position before driving
nails.
REMOVING JAMMED NAILS
ALWAYS disconnect air supply before remov-
ing jammed nails.
Adjustment Dial
Deeper Shallower
WARNING
LOCK
UNLOCK
Trigger Lock Dial
Trigger
WARNING
SN883RH2_SN890CH2(34).book 16 ページ ２０１１年７月８日 金曜日 午後６時１分
