9
Keep hands and body away from the discharge outlet when driv-
ing the fasteners because of dangerous of hitting the hands or
body by mistake.
SCREW LOADING
1
Open the magazine.
Pull down door latch and swing door open. Swing magazine
cover open.
2
Screw loading.
Place a coil of screws in the magazine. Uncoil enough
screws to reach the feed pawl, and place the second screw
on the feed pawl. The screw heads fit in slot on the nose.
3
Swing magazine cover closed.
4
Close the door.
Check that latch engages. (If it does not engage, check that
the screw heads are in the slot on the nose.)
∗
It is also possible to close the door first, followed by the mag-
azine cover.
TEST OPERATION
1
Adjust the air pressure at 18 bar (250 p.s.i.) and connect the
air supply.
2
Without touching the trigger, depress the contact arm
against the work-piece.
Pull the trigger. (The tool must fire the fastener.)
3
Adjust the air pressure as much as the lowest possible ac-
cording to the diameters and length of fastener and the
hardness of work-piece.
WARNING
2
1
Door
Door latch
Screws
1
2
1
2
Changeover lever
"M"
(Metal base)
"W"
(Wooden base)