- 19 -
CONNECTING TIME LENGTH (CODE 02)
Set
“CONNECTING TIME LENGTH”
for external output. ER-2700 can control connecting time length to external
bell, buzzer or chime.
Press
or to select the desired connecting time length up to 60sec.
◆
Initial data= 10 sec.
Example
Connecting Time Length=
15
seconds
Procedure
Display
Press
or
until the display shows
“15.”
Press
to display
CODE 03
as the next setting item.
EXTERNAL TIME SIGNAL (CODE 03 to 24)
Set the time and the day of the week to connect to external bell, buzzer or chime.
After setting the time, select the day of the week.
ER-2700 can set
“External Time Signal”
up to 22 times.
◆
Initial data: Time=- - : - - The day of the week=All days
Key
Day of
the week
SUN MON TUE
WED
THU
FRI SAT
ALL days are
lit on.
ALL days are
lit off.
Example
Time=
AM9:00
, The day of the week=
Mon, Tue, Wed, Thu, Fri
Procedure
Display
Press
or
until the display shows
“9.”
Press
to move the cursor to set the minute.
Press
or
until the display shows
“00.”
Press
to move the cursor to set the day of the week.
Press and key to light off
“SUN”
and
“SAT.”
Press
to display
CODE 03
to set the next time and the day of
the week of Time Signal.
1. ER-2700 can control connecting time length to external bell from 1 to 60 seconds
by 1second.
(Connecting Time Length to the External Bell)
