- 24 -
ERROR CODES
Error codes
Problem
Solution
Time card is not inserted far enough to
where automatic feed activates.
Insert time card to where automatic feed
starts.
Time card is inserted on the wrong side.
Insert time card on the other side.
ER-2500 cannot read holes on time card
correctly.
Check if any holes are covered.
Check if time card is bent or damaged.
●
6 printings or 4 printings (In case of
using Daily Total Hours function) have
been already completed in a day.
●
Improper print was made by manual
operation.
150, 130 or 50 time cards have been al-
ready inserted in a day/month.
ER-2500 can handle up to 150, 130 or 50
time cards a day/month according to set-
ting program.
When setting ER-2500, invalid data is
input.
Input correct data.
Automatic feed does not carry time card
smoothly.
Do not hold time card during printing.
Check if time card is bent or damaged.
Unusable external key is pressed.
When setting ER-2500,
Special day and
Holiday are set to the same day of the
week.
Input correct data.
Printer malfunction.
Try to get normal printout by disconnecting
or connecting the power cord.
CAUTION CODE
Caution Code
Problem
Solution
When you try to revise Machine
Mode, Pay Closing Date, Date,
LST, or Daily Total Hours, all time
data is deleted.
If you press “SET” key
All time data is deleted and the
revised data is registered.
If you press “CANCEL” key
The revision is canceled without
deleting time data.
