14
Setting up the MAX! system
•
Install the device that you want to teach in on the MAX!
system (e.g. MAX! Radiator Thermostat) by following the
instructions in the relevant operating manual.
•
Select "New device" in the software to switch the MAX!
Cube to teach-in mode.
•
Activate the teach-in mode of the device that you want to
teach-in to the MAX! system (e.g. MAX! Radiator Thermo-
stat) by following the instructions in the relevant operat-
ing manual.
•
The device appears in the software.
•
In the software, click "Next".
•
Assign a name for the device. Allocate the device to a room.
•
Follow the same procedure for all the other devices that
you want to teach in on the MAX! system.
6.4
s
ettIng
up
I
nternet
control
If you want to be able to control your system using the Inter-
net control feature or via a smartphone, then Internet access
must also be enabled and Internet control must be set up.
Please note that the MAX! Cube can only be accessed
with the MAX! Internet control feature if the local MAX!
software is inactive.
•
Set up your user account for portal operation using the
local MAX! software.
•
Therefore, click "
Settings
" and "
Internet control
". Please
enter a user name and password. Both may only contain
letters and numbers.
•
Log out to deactivate the local MAX! software.
•
After a brief delay, the Internet LED lights up continuously.
