6
6
Building Your Double Trouble
6.
Connect the ailerons to the servo using the short push rods. You will need to either put a z-bend
in the push rod to suit your servo position or a 90 degree bend and use swing keeper to hold it on to the
servo arm, you can then do the final adjustments using the metal quick link.
5.
Installing the aileron servos. Remove the cover and cut the servo area to fit your choice of servo.
Screw the servos in to the covers using the screws supplied with your servos. Make sure you centre the
servo and fit the servo control arm. Use the string provided to pull the servo wires through the wing, you
may need servo extension leads depending on your servos. Screw the assembly in to place using 4 M2 x
12mm self tapping screws.
Summary of Contents for Double Trouble Balsa Pro-Built Series
Page 1: ...Instruction Manual ...
