Insert the media
1. Open the case.
2. Insert the media supply spindle
into the holder. Open the holder
a little by pulling it up and let the
spindle lock into the guide slots.
3. Push the print head release button
to open the print head mechanism.
Note: The gap sensor position is
moveable and the top sensor is fixed.
Please make sure the gap sensor
is at the location where media gap
will pass through for sensing.
4. Feed the paper, printing side face
up, through the media guides and
place the label leading edge onto
the platen roller. Move the media
guides to fit the label width.
5. Close the print head mechanism
with both hands and make sure the
latches are engaged securely.
1
3
5
6
2
Note
MAX Systems GmbH
|
Am Bauhof 12
|
27442 Gnarrenburg
|
+ 49 (0) 47 63-9 45 95-0
|
www.maxsystems.de
|
Print head
Ribbon rewind
Media
Media guides
Ribbon
Top sensor
Platen roller
Gap sensor
WARNING / ATTENTION
HAZARDOUS MOVING PARTS. KEEP FINGERS AND OTHER BODY PARTS AWAY.
PARTIES MOBILES DANGEREUSES. TENIR LES DOIGTS ET LES AUTRES PARTIES DU CORPS ÉLOIGNÉS.
Gap sensor
Platen roller
Top sensor
Guide slots
