7
5.
After all 3 programs have been set, the LCD display will cycle through all of the settings and lock
in.
6.
If changes are needed after they are set, touch and hold the LOCK icon for 2 seconds and restart
from the beginning.
CARE AND MAINTENANCE
•
Do Not clean with metal scouring pads, abrasives, or solvents
•
Do Not immerse cord or unit in water or other liquids
•
Unplug when not in use and before cleaning
•
Allow unit to cool before storing
•
Do Not use if glass cooktop or power cord is damaged
•
Keep away from other sources of heat
•
Unplug and let cool before cleaning. Use a mild liquid detergent with a moist cloth to wipe off
grease and stains. Let dry. Cover the unit to protect it from dust when being stored.
•
Clean the TEMPERATURE PROBE after use.
TROUBLESHOOTING GUIDE & CUSTOMER SERVICE
If after reviewing the troubleshooting guide the problem is not resolved, do not attempt to repair.
Contact your dealer or call our Customer Service Department at 1-800-227-0196 for additional
information.
1.
The Power Indicator light does not illuminate and/or the exhaust fan is not running.
•
The power plug may be loose in the electrical outlet or there might be a 120V power
supply fault. Reset the circuit breaker and retry.
•
E3 error code means the 120V input power supply is receiving voltage that is too high or
too low and shuts down after one minute. Unplug from the power receptacle and use a
voltage sensor to verify that the voltage is at least 110V AC and not more than 120V AC. If
not, switch electrical outlets or correct before operating the unit.
•
The fuse or circuit breaker has malfunctioned or the unit is unplugged.
2.
The fan is not running and the cookware is not heating up. E0 or E2 error code may be displayed.
•
The cookware may be unsuitable and it is preventing operation (see Selecting the Proper
Cookware). If no cookware is present an E0 code will show.
•
The cookware needs to be centered on the glass plate
•
The glass plate may be cracked
3.
The induction cooktop suddenly stops heating during operation and shuts down. E1 or E2 error
code may be displayed.
•
The overheating sensor detected an excessive high glass top temperature and caused it to
automatically shut down. Heating empty cookware may cause this. Remove cookware and
let everything cool down and retry.
•
The air inlet or exhaust fan is blocked or failed and caused it to overheat. Make sure the
unit is at least 4” from walls and other objects and all vents are clear.
4.
The TEMPERATURE PROBE is not accurately keeping to the set temperature.
•
Verify the Temperature Mode is selected.
•
Follow the instructions in the Temperature Probe Section above to turn it back on.
FRANÇAIS