Max Burton 18XL User Manual Download Page 2

2

IMPORTANT WARNINGS & SAFEGUARDS

Read all instructions thoroughly before operating this unit to avoid injury to self or property and avoid 
damage to the unit.  Keep instructions handy for reference during use.

Caution:

  This unit emits an electromagnetic field.  Persons with cardiac implanted pacemakers or 

other implantable heart devices should consult with their physician before using.

Electrical Hazards

• 

Do Not disassemble. There are no user serviceable parts. Contact Aervoe Industries, Inc. at 800-
227-0196 for assistance.

• 

Do Not submerge unit or electrical cord in liquid, touch with wet hands, or use in a wet 
environment

• 

Do Not use if cooktop is cracked

• 

Do Not operate if the cord has frayed and wires are exposed

• 

Do Not let cord hang over the edge of a table or counter

• 

Never move the unit by pulling on the power cord

Personal Safety

• 

Do Not touch the hot cooktop surface or cookware.  It may remain hot for several minutes after use.

• 

Do Not move the unit during cooking or with hot cookware on top

• 

Do Not place metal objects on the cooktop other than metal cookware or our Max Burton 
Induction Interface Disk.

• 

Do Not heat unopened cans of food.  The container could explode.

• 

Do Not use in or around flammable or explosive environments

• 

Administer close supervision when operating around children

• 

Electric shock hazard.  Only a qualified expert may perform repair and maintenance work on this 
unit.  Never attempt to repair yourself.

Product & Property Damage

• 

Do Not place cookware with contents heavier than 60 pounds on the glass plate

• 

Do Not block the air inlet or exhaust fan. Keep the rear and sides of the unit at least 4” from walls 
for proper ventilation

• 

Do Not clean in a dishwasher

• 

Do Not use the unit for other than its intended use

• 

Do Not place objects with a magnetic strip near the unit while in operation

• 

Use a dedicated 120V, 15A electrical outlet that is not shared with other appliances to avoid 
overheating or shutdown

FCC REQUIREMENTS

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, 
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. 
Operation is subject to the following two conditions:
1. 

This device may not cause harmful interference

2. 

This device must accept any interference received, including interference that may cause 
undesired operation. 

This equipment generates uses and can radiate radio frequency energy and, if not installed and used in 
accordance with the instructions, may cause harmful interference to radio communications. However, 
there is no guarantee that interference will not occur in a particular installation. If this equipment does 

W A R N I N G

RISK OF FIRE OR ELECTRICAL SHOCK

DO NOT OPEN

Summary of Contents for 18XL









Reviews: