Maverick MSC-30BR-WP, Instruction Manual

Page: 10 / 44

10
10
Problem Cause Remedy
The vehicle does not move
Transmitter or receiver is off
Turn on both the transmitter and
receiver
Batteries are not placed correctly in
the transmitter Place batteries in the transmitter
properly
The main battery is not charged
enough Charge the main battery
The vehicle does not follow your
driving inputs
Transmitter or receiver is off
Turn on both the transmitter and
receiver
Transmitter reverse switches are set
incorrectly Check the reverse switch
settings
Transmitter End Point
Adjustments (EPA) are set
incorrectly
Check that your EPA Dials on
your transmitter.
Weak batteries in either the
transmitter or the car
Replace batteries in the
transmitter and recharge the
main battery.
The front and rear wheels rotate in
opposing directions
Incorrect user differential
placement
Insert the differential the
correct way
Trouble Shooting
Please read this section if you have any fault trying to operate the vehicle
If you encounter any other fault whilst operating the vehicle please contact your local hobby shop or alternatively
contact your local distributor.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC
Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This
equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the operating
instructions, may cause harmful interference to radio communications, however, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and in, the user is encouraged to try to correct the interference by one or more of the
following measures:
● Reorie
nt or relocate the receiving antenna.
● Increase the separation between the equipment and the receiver.
● Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
● Consult the dealer or an experienced technician for help.
This d
evice complies with Part 15 of the FCC Rules and with RSS-210 of lndustry Canada. Operation is subject to the following
two conditions:
1)This d
evice may not cause harmful interference, and….
2)This device must accept any interference received, including interference that may cause undesired operation.
WARNING: Changes or modifications made to this equipment not expressly approved by the party responsible for compliance may
void the FCC authorization to operate this equipment.
RF Exposure Statement. The transmitter has been tested and meets the FCC RF exposure guidelines when used with the
accessories supplied or designated for this product, and provided at least 20cm separation between the antenna the user\s body is
maintained. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.
CE Compliance statement
The ra
dio equipment type in this product is in compliance with EU Directive 2014/53/EU. The full text of the Declaration of Conformity is available
at www.hpiracing.com/ce
Die Fernsteuerung in diesem Produkt ist in Übereinstimmung mit der EU Direktive 2014/53/EU. Die vollständige Konformitätserklärung ist erhältlich
unter www.hpiracing.com/ce
La radiocommande dans ce produit satisfait aux directives CE 2014/53/EU. La déclaration de conformité complète est disponible sur www.
hpiracing.com/ce
La tipologia di apparecchiature radio in questo prodotto è
conforme alla Direttiva 2014/53/EU. dell’Unione Europea. Il testo completo della
Dichiarazione di Conformità
è
disponibile a sito: www.hpiracing.com/ce
FCC COMPLIANCE STATEMENT