SLA UV 3D Printer
Guide and User Manual
9
2.3.2 Operating environment
Temperature:
25~30
℃
, humidity: less than 40%.
Avoid strong light illumination as far as possible.Yellow light
lamp is suggested for the room where the printer is lightening.
Keeping the room dust-free and clean to avoid the existence of
large vibration sources near the equipment, which will affect the printing
effect.
3.
Operating instructions
3.1
Preparation before unpacking and printing
(1) Check and be sure the package of equipment is in good
condition, no scratches and damages.
(2) Install the machine. Putting two pieces fitter level device on
the marble in X and Y direction. Adjust the four pieces anchor bolts to
check the level of the printer then lock it.
(3) Energize the printer. Turn on the power of the
machine,industrial computer and laser source (follow the laser source
manual ).
(4) Unlock the emergency botton, press the start botton to
energize the machine.
________________________________________________________
Maven Laser Automation Co.,Ltd..
Version: 02 Date:2019.06.30