background image

Safety

7

1

.05

Operating and specialist personnel

1

.05.01 

Operating personnel

Operating personnel are persons responsible for the equipping, operating and cleaning of

the machine as well as for taking care of problems arising in the sewing area .

The operating personnel is required to observe the following points and must :

always observe the Notes on Safety in the Instruction Manual!

never use any working methods which could adversely affect the safety of the machine!

not wear loose-fitting clothing or  jewelery such as chains or rings!

also ensure that only authorized persons have access to the potentially dangerous area

around the machine!

always immediately report to the person responsible any changes in the machine which 

may limit its safety!

1

.05.02

Specialist personnel

Specialist personnel are persons with a specialist education in the fields of electrics, electro -

nics and mechanics. They are responsible for the lubrication, maintenance, repair and ad just-

ment of the machine.

The specialist personnel is obliged to observe the following points and must:

always observe the Notes on Safety in the Instruction Manual!

switch off the On/Off switch before carrying out adjustments or repairs, and ensure that

it cannot be switched on again unintentionally!

wait until the luminous diode on the control box is no longer blinking or on be fore begin-

ning adjustment or repair work.

never work on parts which are still connected to the power supply! Exceptions are explai-

ned in the regulations EN

50110

.

replace the protective coverings and close the electrical control box a fer all repairs or

maintenance work!

Summary of Contents for MA 2545





































Reviews: