Setting up
27
Draw the thread from the reel stand through guide hole
1
into the bobbin winder tension
unit
2
and then behind the thread clamp
3.
Cut off the thread in thread clam p
3.
The thread is retained.
Place empty bobbin
4
on the bobbin winder spindle .
To switch on the bobbin winder, push up lever
6.
The bobbin is wound during sewing.
The bobbin winder stops automatically, when the bobbin
4
is filled suffi ciently.
Remove full bobbin
4
and cut off the thread in thread clamp
3.
The tension of the thread on bobbin
4
can be adjusted on the bobbin winder tension unit
2.
The volume of thread on bobbin
4
can be adjusted with screw
7.
8
.02
Winding the bobbin thread, regulating the winder tension
Fig. 8 -02
4
5
3
6
7
1
2