•
The weather station has five different weather symbols(sunny,slightly cloudy,cloudy,rainy,stormy,
snow
,
heavy
snowy
).
•
The weather forecast relates to a range of 12 hours and indicates only a general weather trend. The
accu
racy
is about 70 %.
•
For example, if the current weather is cloudy and the rain symbol is displayed, it does not mean the
product
i
s faulty because it is not raining. It simply means that the air pressure has dropped and the
weather is expected to get worse but not necessarily rainy. The accuracy is about 70 to 75%.
•
The sun symbol also appears at night if there is a starry night.
8. Weather forecast symbols
sunny
partly cloudy
cloudy
rainy
stormy
Fig.
3
s
nowy
heavy
snowy
9. Thermometer and hygrometer
9.1 Maximum/Minimum function
Please note that the forecast symbol will become more defined in the course of operation. The forecast
sym
bol is active right from the start, however, the reliability of the forecasts increases with the amount
of
data
collected. The sensor must adapt initially to the reference level at the site.
Note:
•
If
the
measure
values
above
the
range
,
then temperature
display
"
HH
.
H
",
humidity
display
"
HH
%".
•
If
the
measure
values
below
the
range
,
then temperature
display
"
LL.L
",
humidity
display
"
LL
%".
•
Press the MAX/MIN button in normal mode,MAX appears on the display.
•
You can now get the highest values for the indoor and outdoor temperature and humidity since the last
reset.
•
Press the MAX/MIN button again,MIN appears on the display.
•
You can now get the lowest values for the indoor and outdoor temperature and humidity since the last
reset
.
•
Press the MAX/MIN button once more, to go back to the present values display.
•
The device will automatically quit the MAX/MIN mode if no button is pressed.
•
Press and hold the MAX/MIN button for two seconds while the maximum or minimum values are
displayed to clear the recorded readings.
-5-
7.3 Setting of pressure
•
In the
normal
mode
hold
"
BARO
"
button
for
3
seconds
,
it
can
set
the
pressure
value
.
•
Press
-/
RCC
or
+/
°
C
/
°
F
button
to
adjus the pressure value.
• Press “BARO” button to confirm and quit.
9.2 Setting of the temperature unit
•
In the normal mode you can change between
°
C
(Celsius) or
°
F
(Fahrenheit) as temperature unit.
•
Press the +/
°
C
/
°
F
button.