7
Attaching the bed legs
Installation Guide
Take out the post bed legs from the accessory box.
Attach the 3" post bed legs to the 8" post bed legs.
NOTE:
If you want to add more height to the adjustable leg,
attach the 2" post bed leg.
Attach the bed legs to the adjustable bed by threading them in
a clockwise direction into the pre-drilled holes on the frame.
NOTE:
Do not overtighten the bed legs.
1
2
3
Setting up the electronics
FOR QUEEN, KING, AND CAL KING MODELS
Plug the cord for the foot ligt motor to the control box. Insert it into
Plug the cord for the foot ligt motor to the control box. Insert it into
the port labeled "Foot Actuator."
the port labeled "Foot Actuator."
Plug the cord for the foot massage to the control box. Insert it into
Plug the cord for the foot massage to the control box. Insert it into
the port labeled "Foot Vibration."
the port labeled "Foot Vibration."
1
2
FOR ALL MODELS
1
3
Remove and extend the power cord from the adjustable bed.
Remove and extend the power cord from the adjustable bed.
Rotate the adjustable bed over carefully so the top side is now
Rotate the adjustable bed over carefully so the top side is now
facing upward. Do not rest the adjustable bed on its side. The
facing upward. Do not rest the adjustable bed on its side. The
weight may damage the legs.
weight may damage the legs.
Plug the power cable into a working electrical outlet.
Plug the power cable into a working electrical outlet.
NOTE:
NOTE: For optimal safety, using a surge protector (not included)
For optimal safety, using a surge protector (not included)
is highly recommended.
is highly recommended.
2
