10
Remote Control Guide
Head, Lumbar, and Foot Position Adjustments (3, 4, 8)
Press the UP
or DOWN
button to raise or lower the head, lumbar, and foot sections of your adjustable bed.
The "Head Tilt" feature allows you to further bend the head section of the bed for improved neck comfort and better
body contour when you're propped at a higher angle.
Presets
Lounge (1)
Press this button to activate the lounge position. This preset raises the head and foot sections slightly to help remove
stress and tension from your lower back.
Incline (2)
Press this button to activate the incline position. This preset raises the head section to an ideal position for watching TV,
reading, or laptop use.
Zero Gravity (6)
Press this button to activate the zero gravity position. This preset position elevates the legs slightly higher than the
chest, in effect, allowing the blood to flow back to the heart to help reduce stress and fatigue.
Program (7)
Press this button together with a preset button to override factory default presets with your customized presets. For
more information, see " Customizing the preset buttons" on page 11.
Flat (9)
Press this button and then release to return the bed to a flat position.
NOTES:
• If the massage motors are on and the Flat button is pressed, the motors will stop operating during the lowering
of the bed.
• Make sure your bed is in a flat position before using it. Press the FLAT button on the remote control after plugging
in the power cord.
1
2
3
4
8
6
7
9
10
11
12
5
13
