17
10. Troubleshooting
When the following phenomena occurred, please confirm items corresponding to the phenomena before
judgement of breakdown.
Item
Failure
Confirmation/Treatment
1.
No power
-
Try to perform absolute power supply after confirmed
wiring.
2.
LED has red color flashing.
-
Set power OFF -> ON.
3.
Unable to access to web browser
-
Please confirm the Wi-Fi access start-up in Item 8.
4.
No output current signals
-
Please check wiring.
5.
Led has green/orange/ blue flashing.
-
Please check mock output test mode to be completed.
-
If not completed, please press the End button to be
completed.
-
If completed, please set power OFF→ON.
6.
On work on contact point
7.
No changing on current output value
8.
No display of result on the screen of
measurement result.
-
Please update the web browser.
-
Please try to check the terminals to be confirmed and
browser as described in Section 8-1 (c).
9.
All measuring results are displayed “0”.
10.
Not updating on the web application.
11.
Logging cannot be performed.
-
Please try to check the terminals to be confirmed and
browser as described in Item 8-1 (c).
# If above failures couldn’t be recovered or any other failure could come, please contact our
office near from you.
