- 10 -
7-5. Compensation value set
Compensation value can output in a range of 0.1-2.0 (double) as compensation coefficient.
In such case as output is too high or too low for actual density when standard coefficient
is 1.0, this function can output nearest density to actual density by multiplying output.
Utilizing this function, output can be compensated as shown hereunder.
Fig. 9. Compensation value
This function is 0.1 in increments of input in the range of 0.1-2.0 (default is 1.0).
If management is only for trend of dust exhaust, you can do without using this function
(=set value 1.0). In case management requires the nearest value to actual density, you
seize actual density such as counter wash pulse time, etc. by manual analysis first and
then set counter wash pulse shown by device very much close to value of manual analysis.
Compensation value 1.0 trend
For actual density,
detect density outputs high.
Compensation value 0.5 trend
For actual density,
Detect density outputs almost
all alike and understood
compensation is effective.
Detection density
Real density
Detection density
Real density
